On Sale
On Sale
Universal Upper/Lower 4 Link Mount Kit 3/4" Bolt
These are fabricated prerunner 4 link mounts. They are 3/16 steel with a 3/4" bolt whole. They are built in house here at Bro Industries Motorsports. these things are beefy, very solid mounts. they ship raw metal so you can weld them to your truck. measurement details are in the photos.
Included is:
2 adjustable upper mounts
2 lower trailing arm mounts
These are sold as a set. we can sell separately just shoot me a message
Kits are made to order so please allow time to make them. Thank you
On Sale
On Sale
Universal Upper/Lower 4 Link Mount Kit 5/8" Bolt
These are fabricated prerunner 4 link mounts. They are 3/16 steel with a 5/8" bolt whole. They are built in house here at Bro Industries Motorsports. these things are beefy, very solid mounts. they ship raw metal so you can weld them to your truck. measurement details are in the photos.
Included is:
2 adjustable upper mounts
2 lower trailing arm mounts
These are sold as a set. we can sell separately just shoot me a message
Kits are made to order so please allow time to make them. Thank you
Jeep Cherokee Steering Box Brace & Frame Plates
Is your Cherokee's unibody broken and now the steering box is about to fall off? This frame plate was designed to help you do a proper repair on your XJ.
The Steering Box Spacer is constructed of 1/8” & 1/4” plasma cut steel and is an exact replacement for the factory piece. It comes in raw metal.
Also included are plates for the outside of the unibody to help keep the unibody strong and keep from failing. Slots were added to the plates so you could also weld them solid to the unibody for more strength.
It does include new hardware to mount the steering box. If you have any questions feel free to ask.
Silverado rear plate prerunner style bumper
10" C Notch Kit 3" frame WIY
10" Tall C Notch kits for 3" wide frame.
Made out of 10g steel plates. This is a WIY (weld it yourself) Kit.
8" C Notch Kit 3" frame
8" Tall C Notch kits for 3" wide frame.
Made out of 10g steel plates. This is a WIY (weld it yourself) Kit.
3" 90 Degree WEB Gusset a PAIR
These are 3x3" 90 degree gussets. Made out of 10g steel
SOLD AS A PAIR QTY 2
3x3" 90 Degree Chick Gusset a PAIR
3x3" 90 degree chick gusset. Made of 10g Steel.
SOLD AS A PAI QTY 2
CanAm Race Style Tire Carrier
The Bro Industries Motorsports Race style tire carrier is a custom built peace to your car. Most are built to hold up to a 33" spare tire but can be built to hold a 35" upon request depending on application.
OPTIONS THAT COME STANDARD:
-Cage constructed from 1.75" .120 wall DOM tubing
-Y strap to hold spare
-Gussets on all main tubes
-Factory frame sleeve to handle impact
ADDITIONAL OPTIONS:
-Yeti Cooler Rack[$600 extra
-Low mounted chase bar
-Painting
All cages are custom built to each order so please allow 3-4 weeks of build time. Car is required at shop.
CanAm Max Cage 4 seater
The Bro Industries Motorsports 4 seater cage features a full cage with aluminum roof. Cage can be built with or without rear bumper built in upon request.
OPTIONS THAT COME STANDARD:
-Cage constructed from 1.75" .120 wall DOM tubing
-Hand formed 14 gauge aluminum roof
-Rear view mirror mount
-Dual whips tabs
-Radio antenna tab
-Gussets on all main 90 degree tubes
ADDITIONAL OPTIONS:
-Intrusion bar
-Powder coating - solid color [optional] [custom candy colors cost extra]
All cages are custom built to each order so please allow 3-4 weeks of build time
2014-18 RZR900 RZR1000 front bumper
2014-18 RZR900 RZR1000 XP Turbo
1.5" DOM Tubing with 1/8th" aluminum skid plate
Lazer cut out light tabs
10" single row LED light bar
On Sale
On Sale
14-17 RZR 1000 XP / 16 turbo Radius Rods (2 & 4 seater)
FEATURES:
- Fits Polaris RZR ONLY
- Superior strength and rigidity to OEM rods
- Direct bolt-on replacement
- Aggressive turret design
- Heavy duty adjustable end-links
- .120 wall DOM tubing
- Made in the USA
Package Contains:
- Radius Rods
- Installation Hardware
00-07 Chevy Silverado Race Kit
Bro Industries Motorsports Is Proud To Introduce The 1996-2006 GM 1500 2wd Race Kit. Our Race Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Extended Heimed Tie Rod w/ Machined Steering Clevis And Plate Shock Tower w/ Integrated UCA Mounts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited For Those Who Use Their Vehicle As A Dedicated Off Road Rig Or One That Sees Occasional Street Use.
PERFORMANCE SPECS
- Wheel Travel - Averages 17" Of Useable Wheel Travel (Ranges 16" - 18" Depending On Limit Strap / Bump Stop / Shock Configuration)
- Wheel Base: Extended 1.25" Forward
- Track Width: Extended 4.5" On Each Side
- Recommended Tire Size: 37"
- Recommended Wheel: 17 x 9" w/4.5" Backspacing (0mm Offset)
INCLUDES
- Upper Arms
- Lower Arms
- Spindles
- Tierods w/ Machined Steering Clevis
- CNC Shock Towers w/ CNC Boxed Engine Cage
- Grade 8 Hardware
REQUIRES
- 10" 2.5" Coilovers (NOT INCLUDED IN KIT ABOVE)
- 10" 3.0" Bypasses (NOT INCLUDED IN KIT ABOVE)
- Welding Is Required - This Is Not A Bolt On System And Will Require Proficient Knowledge In Fabrication To Perform The Installation
- Extended Brake Lines (Minimum 33" Line End To End
- Possible Extension Of Factory ABS Sensor Line (Depends On Wire Routing)
- Bumpstops - Can Be Configured To Bump Off Of Lower Control Arm, Upper Control Arm Or Spindle Uniball Cup - Typically Recommend a King 2.0" x 2" Stroke With King Fabricated Cans
- Limit Straps - Recommend 10" Limit Strap With Adjustable Clevis Kit (Can be Purchased In The Builders Components Section of Our Store)
’99-’06 Chevy Silverado 1500 Control Arm Bolt Gusset Kit
These gusset kits are designed for 1999-2007 Chevy 1500s
These WIY packs of gusset tabs are designed to provide the ultimate in strength to the chassis pivots of the specific vehicle they are designed for. Designed to be easily welded into the chassis after you prep the frame.
Bolt Hole Sizes:
Front Lower Arm - 5/8"
Front Upper Arm - 1/2"
- 3/16″ cut for upper and lower control arms
- 16 pieces total
Silverado 07-13 1500 GMT900 Chassis Pivot Gusset Pack
Bolt Hole Sizes:
Front Lower Arm - 5/8" Bolt
Front Upper Arm - 1/2" Bolt
- 3/16″ cut for upper and lower control arms
- 16 pieces total
1.5" CNC Circle Drop Outs
1.5" 10g steel Tube caps
These are drop out parts so it has a small pit on one side
2 3/8” x 2 1/4” triangle cnc drop outs
On Sale
On Sale
2003-06 Chevy 2500/3500 Front Bumper
2003-06 Chevy 2500/3500 Front Armored Bumper
Made from 3/16 steel
Fully assembled and welded
Come Raw metal so you can color match or bed lined however you want.
Please allow a couple week build time.
GM 07-13 Third Brake Light
2007-2013 Chevy Silverado/GMC Sierra LED Third brake light with built in amber LED dust lights
Light box is made from 14g steel and Bed lined Black. Attach a message if you prefer Raw Metal.
Pods are 40W 4000 Lumens each!
*For off-road use only*
GM 99-07 third brake light
1999-2007 Chevy Silverado/GMC Sierra LED Third brake light with built in amber LED dust lights
Light box is made from 14g steel and Bed lined Black. Attach a message if you prefer Raw Metal.
Pods are 40W 4000 Lumens each!
*For off-road use only*
F150 04-08 Third Brake Light
2004-2008 F150 LED Third brake light with built in amber LED dust lights
Light box is made from 14g steel and Bed lined Black. Attach a message if you prefer Raw Metal.
Pods are 40W 4000 Lumens each!
*For off-road use only*
F150/RAPTOR 09-14 Third Brake Light PREORDER!!!
PREORDER COMING VERY SOON!!!
F150 2009-2014 LED Third brake light with built in amber LED dust lights
Light box is made from 14g steel and Bed lined Black. Attach a message if you prefer Raw Metal.
Pods are 40W 4000 Lumens each!
*For off-road use only*
FORD F150/Raptor F250 F350 15-20 Third Brake Light PREORDER!!!!
2015-2020 FORD F150/Raptor F250 F350 LED Third brake light with built in amber LED dust lights
Light box is made from 14g steel and Bed lined Black. Attach a message if you prefer Raw Metal.
Pods are 40W 4000 Lumens each!
*For off-road use only*
On Sale
On Sale
4th Gen Ram 2500/3500 Front Bumper
4th Gen Ram 2500/3500 Front Armored Bumper
Made from 3/16 steel
Fully assembled and welded
Come Raw metal so you can color match or bed lined however you want.
Please allow a couple weeks build time.
2019-21 Ford Ranger Third Brake light
2019-2021 FORD Ranger Third brake light with built in amber LED dust lights
Light box is made from 14g steel and Bed lined Black. Attach a message if you prefer Raw Metal.
Pods are 40W 4000 Lumens each!
*For off-road use only*
2010-2018 Dodge Ram 1500 2500 3500 Third Brake Light
2010-2018 Dodge Ram 1500 2500 3500 Third brake light with built in amber LED dust lights
Light box is made from 14g steel and Bed lined Black. Attach a message if you prefer Raw Metal.
Pods are 40W 4000 Lumens each!
*For off-road use only*
Upper 4 link Mounts 3/4" bolt
These are fabricated prerunner 4 link mounts. They are 3/16 steel with a 3/4" bolt whole. They are built in house here at Bro Industries Motorsports. these things are beefy, very solid mounts. they ship raw metal so you can weld them to your truck. measurement details are in the photos.
Included is:
2 adjustable upper mounts
These are sold as a set. we can sell separately just shoot me a message
Kits are made to order so please allow time to make them. Thank you
Lower 4 Link Mounts 3/4" bolt
These are fabricated prerunner 4 link mounts. They are 3/16 steel with a 3/4" bolt whole. They are built in house here at Bro Industries Motorsports. these things are beefy, very solid mounts. they ship raw metal so you can weld them to your truck. measurement details are in the photos.
Included is:
2 lower trailing arm mounts
These are sold as a set. we can sell separately just shoot me a message
Kits are made to order so please allow time to make them. Thank you